Nicro Dry Lubricant Spray 666 K-4 ULTRA High capillary action

Area of application:✔ Motor vehicles: hinges, wheel bearings, Bowden cables, kingpins, track rod joints, clutches, ✔ Fans, chain bearings, axle bearings of transport trolleys, transport chains✔ Industrial operations: chain inner bearings, gear drives, slideways, clutches, door locks, transport chains, wire ropes, pins, joints, adjusting spindles, screw and plug connections.Technical data:✔ Silicone-free✔ Provides high-pressure, wear, corrosion and oxidation protection✔ Cleans and lubricates all metals, chrome steel, most plastics, glass and preserves wood and leather✔ Temperature and ageing resistant✔ Flash point: -35°C✔ Advantages CO² propellant: Environmentally neutral (as the CO² blowing agent is taken from the atmosphere and no additional CO² is produced), non-flammable, non-toxic, does not react with other chemical substances (therefore: 100% pure active ingredient content), higher yield (as the CO² blowing agent content is only approx. 2% of the total product)Application: Shake the can thoroughly before use. Spray on in thin layers. Check plastic and painted surfaces for compatibility in an inconspicuous area before use. For optimum lubricating effect: Spray sufficient fine lubrication onto the respective workpiece or hinge and allow to take effect. The full effect can be seen after just 1 to 2 minutes drying time.sealing surfaces: Apply fine lubrication to surfaces and allow to take effect. For chrome steel surfaces, rub in with a soft cloth. Protects surfaces optimally against chemical vapours, aggressive media, salt and dirty water, vapours in the high and low temperature range.Always read and follow the instructions and special safety and hazard information carefully before use.Storage:Store in a dry place. Protect from sunlight or other heat sources. Only spray in dry weather and in areas protected from wind and in well-ventilated rooms. Observe further instructions on the label! Disposal:Please only recycle empty containers. Take containers with residues to a hazardous waste collection point.Hazard statements:H222-H229 Extremely flammable aerosol. Pressurised container: may burst if heated.